6FT Top Mount Twin Roller Barn Closet Sliding Hardware Kit

Product Description The DIYHD 2505 Single Sliding Barn Door Hardware features top-mounted double head rollers made of brushed stainless steel. This sliding hardware is suitable for doors weighing up to 198lbs (90kgs) and is designed for door thickness ranging from 1 3/8" to 1 3/4". Please note that the track comes pre-drilled with holes for track and wall connectors, but they may not align perfectly with studs on the wall. Wooden boards may be necessary for walls with studs.

This full set hardware includes two twin rollers, two stops, one track, one set of track and wall connectors, and one floor guide. The solid rollers ensure a super smooth sliding motion, while the anti-jump feature provides added safety by keeping the rollers close to the track. Half of the track and wall connectors are pre-fixed with the track, and extra wooden boards may be needed to align pre-drilled holes with studs on the wall.

Technical details for installation: the height from the top of the door to the top of the roller is 4 1/2", and the height from the floor to the center of the track is the door’s height plus 2 1/2". It is recommended to mark a level line on the wall during installation. The gap between the door and the wall is approximately 1 1/8" based on a door thickness of 1 3/8". Additionally, the track can be mounted on the wall without the round discs to minimize the gap between the door and wall.

Gallery for reference: hardware kit only, does not include the door panel. Material: 304 stainless steel; Surface: brushed satin finish. The track comes pre-drilled with holes that are NOT 16" apart, so this item may not be suitable for drywall stud walls. The height from the top of the door to the top of the roller is 4.7". The full set kit includes two rollers, two stoppers, a 6FT track, four track wall connectors, and one floor guide.

product information: