DIYHD 5ft Brushed Nickel Bypass Sliding barn Door Hardware

Hardware Description: Brushed Nickel Steel Bypass Double Sliding Barn Door Hardware

This hardware set includes rollers, stoppers, tracks, track and wall spacers, bypass brackets, iron floor guides, and anti-pads. It is designed for door thickness ranging from 1 3/8" to 1 3/4" and can hold a maximum weight of 198lbs per door.

The track comes in various lengths such as 5FT, 5.5FT, 6FT, and 6.6FT, which include one piece of track, and 8FT and 10FT, which come with two short tracks and a connector. The track is pre-drilled with holes 16" apart, with additional pre-drilled holes at the ends for joining tracks to create a 13ft 4 door bypass system.

Installation is straightforward, especially for non-wooden frame openings. However, if the baseboard or wood frame thickness exceeds 3/5 or the pre-drilled holes do not align with studs, a wooden board may need to be added on the backside of the track.

For the bypass system to function properly, it requires a minimum of 10" of space from the top of the door to the ceiling. The gap between two doors is 2", based on a door thickness of 40mm (1 3/5"). To reduce this gap, customers can opt for a 45mm (1 3/4") door panel.

To install the bypass bracket, drill holes on the wall based on the door panel's height. Adjust the stoppers, tighten the track onto the wall with spacers, then drill holes on the door panel to fix the wheels. Use the anti-pads to reduce gaps between the door and track. Hang the wheels on the track, align the waist-shaped hole of the bypass bracket with the inner track, drill holes on the wall, and fix the outer track onto the bypass bracket using spacers. Finally, hang the outer door on the track, install the floor guide, and adjust the anti-pads.

Overall, this Brushed Nickel Steel Bypass Double Sliding Barn Door Hardware is a high-quality, easy-to-install solution for bypass door systems.

product information: